Knowledgebase
Knowledgebase:
HP OfficeJet Pro L7xx series fix
Posted by Wacey Richards, Last modified by Russ Richards on 28 September 2011 09:24 AM
Here is the magical process(I have a HP 7680, but I think it will be the same for all models)
a) Uninstall the #?!!!$! HP software using the Uninstall from Control Panel.
b) Download the latest HP software for your printer from their site.
c) Run the Level 2, Level 3 and Level 4 Uninstall programs in the CCC folder of the software you just downloaded from HP(or, on the HP CD if you cannot download the latest version).
d) Scan your hard drive and delete any and all HP folders, including the "Hewlett Packard" folders. PLEASE NOTE: You probably will not be able to delete some folders because files are in use. You must delete these folders. Either reboot in safe mode to delete them, or shut off all services in msconfig(reboot required).
e) Delete the Twain32 folder in Windows folder
f) Empty the Recycle bin(probably not important, but I was taking no chance)
g) This would now be a good time to run your registry cleaner. This program should remove all registry entries that point to files that don't exist anymore. Registry Mechanic did not do this completely for whatever reason, but this should make the next step
h) backup your registry. The way I did this was "Start", "Run" and type msconfig. Click "Launch System Restore" and "Create a Restore Point". Do this, but be warned that there were a few times I tried to restore to one of these and the Windows process was unsuccesful. Didn't investigate why, but it happened, and more than once.
i) now the time consuming part. You are going to delete at least many hundreds of entries so get comfortable. Open the registry edito(regedit) and start scanning for these values. When you find them, delete the entire key, not just the key value(i.e. delete the folder on the left side of the regedit window). Sometimes you will get access denied. Just right click on the key and click "Permissions". Change the "Everyone" group to have full permission, then delete the key. This doesn't happen often - maybe 10 times? Also, please note that sometimes you will see that where the value was found, it has nothing to do with HP and so I left them alone. I would estimate 99% of what I found, I deleted. Believe me, you'll get good at this and your eyes will quickly identify the fact it's from an HP installation.
During this scan process, you will find reach a point where on the left side of regedit, there are dozens of folders that start with HP, all lined up nicely. Delete ALL of them.
1) Scan for and delete any folder(key) that contains "\hp". This is the hard one. Hundreds of them. (why didn't these get deleted by my registry cleaner program???)
2) Scan for and delete any key that contains "AIO"
3) Scan for and delete any key that contains "hp " (that is hp followed by a space. The search function allows this
4) Scan for and delete any key that contains "digital imaging"
5) Scan for and delete any key that contains "hewl"
j) almost there, and don't mess this part up. Make sure your printer is NOT connected. Reboot.
k) Reinstall using latest version. During installation, choose that you don't want HP software to check for updates and also, check the "custom" installation. When you reach the screen that lets you pick which programs to install, uncheck ALL of them that you can. You only want to install what is required. The rest is JUNK. When you reach the point where it wants to find the printer, do NOT hook the printer up. The software will assume you will hook it up later. Finish the installation and reboot.
l) run the install again. This time the menu will say "Add a device". Go ahead and click on that and hook up your printer(use USB). I did discover on one of my trips through this maze that it found the printer and installed it nicely, BUT, when I started HP Solution Center, it did not display the device. Then I ran Setup again, tried to install it as a network printer(cabled-not wireless). This failed but then, there it was the next time I opened Solution Center!! The process of trying to install network printer fixed something so don't give up once you get this far.
m) Good luck with this. I feel for all the people out there that just can't afford to go buy another printer. Again, I wouldn't touch HP with a mile long stick. The only reason I wouldn't give up is I was PISSED. I actually did this for somebody else, but I work for this person, so felt obligated to solve it. And I have HP printers at home, but, after researching this issue on the Internet and seeing what all of you have written, I will never buy HP again.
(0 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
CAPTCHA Verification 
 
Please enter the text you see in the image into the textbox below (we use this to prevent automated submissions).